درود
ببین روی s5570 اینجوری رام میزنن
یه نگاه کن ببین چجوری عمل کردی :
ATTENTION!!! I'M NOT RESPONSABLE FOR ANY DAMAGE THAT YOU MAY CAUSE TO YOUR PHONE,DO IT ON YOUR OWN RISC!!THOSE FIRMWARE ARE FROM THE EUROPEAN OFFICIAL UPDATES,THEY WONT WORK FOR ASIA/AUSTRALIA!(i didnt test it)
You dont have to root your phone for any of those two methods.
THE LATEST ROM IS THE ONE FROM THE FIRST METHOD OF FLASHING!
You will need: -A WINDOWS XP,VISTA,SEVEN machine
-NET COMPACT FRAMEWORK 2.0
-USB CABLE AND THE S5570 ,doh!
First Method(4 files mode) ANDROID 2.3.6 updated 05.05.2012
1) Download this version of Odin from
HERE
2) Download and install KIES from
HERE (if u allready got Kies pass this step),we need KIES for the latest USB drivers
3) Download the firmware from
HERE extract it pass: sampro.pl
4) Download OPS file from
HERE
5) Make shure that your phone is 70% charged
6) Turn off your phone
7) Now enter ODIN,you will something like this
8) Load the OPS file that you have just downloaded by clicking
OPS on Odin and select
TASS_v1.0.ops
9) Now from the firmware that you have extract it(
THIS IS THE MOST IMPORTANT PART)
-APBOOT_S5570XWKTN_CL1019135_REV02_user_low_true.ta r.md5 goes into
BOOT
-MODEM_S5570XWKT6_CL1000416_REV02.tar.md5 goes to
PHONE
-CODE_S5570XWKTN_CL1019135_REV02_user_low_true.tar. md5 goes to
PDA
-and GT-S5570-MULTI-CSC-OXXKTB_RST.tar.md5 to
CSC
MAKE SURE THAT YOU GET IT RIGHT!!!
10) Enter
Downloading Mode,press VOLUM DOWN ,OK BUTTON, POWER BUTTON AT THE SAME TIME!
11) Connect the USB cable,now in Odin at COM PORT MAPPING is should appeare the USB cable as connected(COM1,COM2 etc)
12) Now make shure the in ODIN the only boxes that are checked are
AUTO REBOOT ,
RESET TIME and
PROTECT OPS after you have checked press
START,now u have to wait 5-6min.
13) It must say above the COM connection
PASS on a blue backgroud to disconnect the USB cable and u are done.
!!EVEN IF THE PHONE BOOTS UP DON'T DISCONNECT THE USB CABLE,WAIT FOR THE PASS SCREEN!!
METHOD 2(1 file MODE) ANDROID 2.3.6 Updated 09.02.2012
1) I guess now u got ODIN and KIES(look in the post above),and your phone haves 70% battery
2) Turn off your phone
2) Now we gonna download the 2.3.6 firmware from
HERE and extract it.
PASS: sampro.pl
3) Then we download the OPS from
BENI OPS (
ATTENTION! IF IS NOT WORKING WITH BENI OPS USE TASS OPS) we gonna load the file and we have to check the option
ONE PACKAGE then we click the
ONE PACKAGE button below and select the file from the folder that we just downloaded/extracted S5570XWKT7_S5570XWKT3_S5570ERAKT1_HOME.tar.md5,the only options that should be checked are
ONE PACKAGE,RESET TIME,AUTO REBOOT,PROTECT OPS
4)
DO A FACTORY RESET,DONT FORGET!!! AND REMOVE DE SD CARD (you must do this to avoid errors,but isnt a Must
)
5) Enter Downloading mode,explained above is the 1st method,connect the USB cable,and wait for ODIN to connect to your phone COM port(see above),press
START button.
6) Wait 5min..wait for the PASS screen (like above),disconnect the USB and you are all done.